Hj Clean Tech Factory Supply Online Monitoring System Online Air Particle Counter Testing Three Locations Airborne Particle Counter

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: One Year
• Transport Package: Cartons
• Specification: customized
• Trademark: HJCLEAN TECH
• Origin: China
• Production Capacity: 10000
• Package Size: 100.00cm * 120.00cm * 80.00cm
• Package Gross Weight: 100.000kg

Product Description

Product Description

 

PRODUCT INTRODUCTION.

The 5102 online laser dust particle counter is used to measure the size and number of dust particles per unit volume of air in a clean environment, and transmit the number of corresponding particles to the host computer through MODBUS485 communication. It can control the clean environment with cleanliness level of 100,000 to 100. This instrument uses imported semiconductor laser light source, small size, light weight, high detection accuracy, computer control, as long as the instrument is powered on, it can automatically output data without personnel operation. Therefore, it is very convenient to test a clean environment. It is widely used in electronics, optics, chemistry, food, cosmetics, medicine and health, biological products, aerospace and other sectors.

Electrical connections.

Quick link between male and female plugs of core aviation plug. The pin definition is as follows: 1 Red -----+7.4~12VDC 2 yellow or green -----A 3 White or blue -----B 4 black -----GND

Counter interface pin definition: pin (red wire) DC positive input pin (yellow or green wire) 485 A Pin (white or blue wire) 485 B Pin (black wire) DC0V. It is recommended to use a 2-core twisted-pair shielded wire for the communication wire, and the wire diameter can be 0.5mm. One end of the shielding layer must be connected to one end of DC0V. The DC input range is 7.4V-12V, and the wire diameter can be 0.5-1.0. It should be noted that if the distance between the power supply and the counter is far, because of the line voltage drop, if the voltage supplied to the counter is lower than 7V, it may cause the counter to not work normally.

Product parameters

 

monitor size	140*100*45
weight	0.3kg
Maximum power consumption	2VA
Power supply	External 12-14VDC/1A
Standard signal particle size channel	0.3-5μm optional 2, standard 0.5, 5μm
Sampling flow	28.3LPM
sampling period	1 minute
environmental conditions	Temperature: 0ºC-40ºC Humidity: 20%-75% Ambient pressure and sampled gas pressure: 86kPa-106kPa
Self-purification time	≤10min
Allowable maximum sampling concentration	35000 particles/L (the particle size of the dust particles is not greater than 0.5μm), the sampled air must not contain corrosive gases such as acid and alkali

Company Profile

Suzhou HJ Clean Technology Co., Ltd was established in 2004 in Suzhou, Jiangsu Province, the home of purification in China. It mainly produce equipment and instruments of clean room deals in business of clean room projects  for pharmaceutical factory, laboratory, medical organization etc. .
 The company has more than 30 patents products, ISO9001 certification, GMP certification and CE certification. The company is a member of China clean room Association and is one of  Jiangsu Engineering Technology Research Center. We are one of the leading companies in the field of clean room in China.
The company's products including airborne particle counter, air sampler, sterility isolator, negative pressure cabinet, VHP passbox, vhp generator, atomized sterilizer, BIBO bag in bag out filter system, online monitoring dust particle and plankton system,  online detecting plankton, air flow capture hood, aerosol generator and photometer, Glove Integrity Tester, negative pressure dispensing booth, laminar air flow hood, purified cart trolley, clean bench, biosafety cabinet, movable purifier, air purifier and sterilizer, purified oven, purified wardrobe, FFU series of fan filter unit, dynamic passbox, static pass box,air shower, mist shower etc have been sold to countries around the world, from the establishment to the present.   
The company has a professional team of R&D , design and experienced worker , and is equipped with advanced testing instruments and installation tools. In addition, the company has introduced the advanced management , and the products we provide are  high quality and  cost performance.
The company adheres to the tenet of customer first, technology leader, service first, and pioneering and enterprising, and wholeheartedly serves domestic and foreign enterprises.